Feeler Gages

These gages take axially (X&Y) clearance readings between the packing and the packing gland on the rotor. Their design permits you to take the reading and clear the packing bore and rotor. Reading can be taken on turbine wheels, diaphrams, packing, bearing clearances, as well as other applications.

Model Number	Range (inches)

RXY25100	.025 - .100
RXY50300	.050 - .300
RXY275500	.275 - .500
RXY450650	.450 - .650

Takes the radius reading between the packing and the shaft. It will clear the shaft and the rotor below the joint for an accurate reading.
Model RPG10115 - takes readings below the joint where the packing teeth are broken or damaged.
Model RPG10115A - only takes readings at the horizontal joint,.

Model Number	Range (inches)

RPG10115	.010 - .115
RPG10115A	.010 - .115

This gauge is designed to take readings on turbine wheels, diaphragms, packing, bearing clearances, as well as other applications. This gauge replaces a full set of feeler gages.

Model Number	Range (inches)	Width (inches)

ES200	.020 - .200	.25
100250	.005 - .250	.25
100500	.020 - .500	.25
200500	.020 - .500	.375
3001000	.450 - 1.000	.25
1001000	.450 - 1.000	.375
2001000	.370 - 1.000	.375
1001500	.950 - 1.500	.375
1002000	1.450 - 2.000	.375

Power House Tool gages are all available in nickel plated and black easy read fiinishes.


Model Number	Range (metric)	Width (inches)

ES200mm	.50 - 5.0	.25
100250mm	.20 - 6.60	.25
100500mm	.40 - 12.80	.25
200500mm	.40 - 12.80	.375
3001000mm	12.0 - 25.0	.25
1001000mm	12.0 - 25.0	.375
2001000mm	9.40 - 25.40	.375
1001500mm	25.0 - 38.0	.375
1002000mm	37.0 - 50.0	.375


Model Number	Range (metric)

RXY25100mm	.60 - 3.00
RXY50300mm	1.20 - 7.60
RXY275500mm	7.0 - 12.80
RXY450650mm	12.0 - 16.60


Model Number	Range (metric)

RPG10115amm	.20 - 3.000
RPG10115mm	.20 - 3.000

Add the letter B to end of model # for easyread gauge (example: 100250B)

Power House Tool, Inc.
167 Oswalt Ave.
Batavia, IL 60510
Phone: (815) 727-6301